Siemens SIPROTEC 7UT613 series Manual page 628

Glossary
Modems
MV
MVMV
MVT
MVU
Navigation pane
Object
Object properties
Off-line
OI_F
On-line
OUT
Parameter set
Phone book
PMV
Process bus
PROFIBUS
PROFIBUS address
628
Modem profiles for a modem connection are stored in this object type.
Measured value
Metered value which is formed from the measured value
Measured value with time
Measured value, user-defined
The left pane of the project window displays the names and symbols of all containers
of a project in the form of a folder tree.
Each element of a project structure is called an object in DIGSI.
Each object has properties. These might be general properties that are common to
several objects. An object can also have specific properties.
In offline mode a connection to a SIPROTEC 4 device is not required. You work with
data which are stored in files.
Output Indication Transient → Transient information
When working in online mode, there is a physical connection to a SIPROTEC 4 device.
This connection can be implemented as a direct connection, as a modem connection
or as a PROFIBUS FMS connection.
Output indication
The parameter set is the set of all parameters that can be set for a SIPROTEC 4
device.
User addresses for a modem connection are saved in this object type.
Pulse metered value
Devices with a process bus interface allow direct communication with SICAM HV mod-
ules. The process bus interface is equipped with an Ethernet module.
PROcess FIeld BUS, the German process and field bus standard, as specified in the
standard EN 50170, Volume 2, PROFIBUS. It defines the functional, electrical, and
mechanical properties for a bit-serial field bus.
Within a PROFIBUS network a unique PROFIBUS address has to be assigned to
each SIPROTEC 4 device. A total of 254 PROFIBUS addresses are available for each
PROFIBUS network.
7UT613/63x Manual
C53000-G1176-C160-2