Post Per Jar - Midtronics CELLTRON MAX Instruction Manual

CELLTRON MAX
Press ENTER to save your changes or BACK to return one
4.
screen without saving any changes.
Temperature Threshold
1. Use the ARROW keys to highlight the TEMPERATURE
THRESHOLD and press the ENTER key. The EDIT THRESH-
OLD TEMPERATURE screen appears on the lower screen.
Use the ARROW keys to select UPPER or LOWER TEMPER-
2.
ATURE THRESHOLD and press the ENTER key.
Use the ARROW keys to increase or decrease the thresh-
3.
old value.
4. Press ENTER to save your changes or BACK to return one
screen without saving any changes.
Conductance Threshold
1. Use the ARROW keys to highlight CONDUCTANCE THRESH-
OLD and press the ENTER key. The EDIT THRESHOLD
CONDUCTANCE screen appears on the lower screen.
Use the ARROW keys to select UPPER or LOWER CONDUC-
2.
TANCE THRESHOLD and press the ENTER key. .
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
Use the ARROW keys to highlight the conductance
3.
threshold percentage value you would like to change and
press the ENTER key. The percentage value to the right is
highlighted.
4. Use the ARROW keys to increase or decrease the percent-
age value by increments of one.
Press BACK to return to the EDIT THRESHOLD screen.
4.
5. Press BACK again to return to the TEST SETUP screen.

Post Per Jar

Use the ARROW keys to highlight POST PER JAR and press
1.
the ENTER key. The EDIT POST PER JAR screen appears on
the lower screen.
Use the ARROW keys to increase or decrease the thresh-
2.
old value.
Press ENTER to save your changes or BACK to return to
3.
the TEST SETUP screen without saving any changes.
19
• •
www.midtronics.com