Download Print this page
Midtronics PBT-300 Instruction Manual

Midtronics PBT-300 Instruction Manual

Advanced battery conductance/ electrical system tester

Advertisement

Patents
This tester is made in the U.S.A. by MIDTRONICS, INC. and is protected by
one or more of the following U.S. Patents: 6,323,650; 6,316,914; 6,304,087;
6,249,124; 6,163,156; 6,091,245; 6,051,976; 5,831,435; 5,821,756;
5,757,192; 5,592,093; 5,585,728; 5,572,136; 4,912,416; 4,881,038;
4,825,170; 4,816,768; 4,322,685; Canadian patents: 1,280,164; 1,295,680;
United Kingdom patents: 0,417,173; 0,672,248; German patents: 689 23
281.0-08; 693 25 388.6; 93 21 638.6; and other U.S. and Foreign patents
issued and pending. This product may utilize technology exclusively
licensed to Midtronics, Inc. by Johnson Controls, Inc. and/or Motorola, Inc.
Service
For service, contact Midtronics for a Return Authorization number, and
return the unit to Midtronics freight prepaid, Attention: RA#. Midtronics will
repair or replace the tester and reship, the next scheduled business day
following receipt, using the same type carrier and service as received.
Advanced Battery Conductance/
If Midtronics determines that the failure was caused by misuse, alteration,
Electrical System Tester
accident, or abnormal condition of operation or handling, purchaser will
have the option of purchasing a replacement tester or the unit will be
returned freight collect. Battery testers beyond the warranty period are
subject to the repair charges in effect at that time.
Limited Warranty
This battery tester is warranted to be free of defects in materials and
workmanship for a period of one year from the date of purchase.
Midtronics will, at our option, repair the unit or replace the unit with a
remanufactured tester. This limited warranty applies only to Midtronics
battery testers and does not cover any other equipment, static damage,
For testing 12-volt automotive starting batteries
water damage, overvoltage, dropping unit or damage resulting from
rated in CCA, SAE, DIN, IEC, and EN
extraneous causes including owner misuse. Midtronics is not liable for any
incidental or consequential damages for breach of this warranty. The
warranty is void if owner attempts to disassemble the unit, or to modify the
cable assembly.
INSTRUCTION MANUAL
P/N 168-074A 4/04 ©2004 Midtronics, Inc.

Advertisement

loading

Summary of Contents for Midtronics PBT-300

  • Page 1 Patents This tester is made in the U.S.A. by MIDTRONICS, INC. and is protected by one or more of the following U.S. Patents: 6,323,650; 6,316,914; 6,304,087; 6,249,124; 6,163,156; 6,091,245; 6,051,976; 5,831,435; 5,821,756; 5,757,192; 5,592,093; 5,585,728; 5,572,136; 4,912,416; 4,881,038; 4,825,170; 4,816,768; 4,322,685; Canadian patents: 1,280,164; 1,295,680;...
  • Page 2: Battery/Starting System/Charging System Test

    6. CHARGING SYSTEM TEST 2. BATTERY TEST 1. If testing in-vehicle, make sure all vehicle loads (lights, etc.) are NOTE: The battery must be good and fully charged for this test. off and the key is removed. Connect the tester clamps to the battery: red to positive(+), black to negative (–).