Important - Before You Start
The CPX-900 is intended for non-warranty battery testing.
•
This tester does not produce a battery warranty code. Use
the DSS-5000 Battery Diagnostic Service System or DCA-
8000 Battery Diagnostic Tool when testing batteries under
warranty.
Before operating the analyzer, refer to Instruction Manual
•
Always follow battery manufacturer instructions and BCI
•
(Battery Council International) safety recommendations
For additonal support go to toyotacpx900.midtronics.com
•
Connections And Data Ports
Display Screen
Cooling Vent
Arrow Keys & Power Button
Micro-USB Port
Thermal Printer
Conductance Profiling
Conductance Profiling™ technology determines battery cranking
capability and identifies batteries with poor Reserve Capacity. This
additional battery analysis can take up to 60 seconds to complete.
IMPORTANT: Always begin each test by connecting the
tester clamps to the battery being tested. The testing
process begins as soon as the clamps are connected.
www.midtronics.com
CPX-900 Toyota/Lexus
Battery & Electrical Diagnostic Analyzer
Temperature Sensor
VIN Barcode Scanner
Clamp Tabs
User-replacable AA batteries
User-replaceable test clamps
Initial Power Up
Display
Tap Next to continue.
Language
Select the analyzer default standard language.
Temperature
Select the default temperature units (Fahrenheit/
Units
Celsius) used when measuring battery
temperature.
Number
Select the default number display using
Separator
commas or periods separators.
Data Collection Consent
Select Accept to Consent to Collection and Use of Test Data.
Logo Selection
Select the correct brand logo: Toyota /Lexus.
Midtronics Inc.
7000 Monroe Street Willowbrook, IL 60527
Quick Reference Guide
Page
1
Quick Reference Guide
November 2019
167-000925EN-A
167-000925EN-A
November 2019