Related Manuals for Midtronics CPX-900PL
Summary of Contents for Midtronics CPX-900PL
- Page 1 October 2018 CPX-900 167-000848EN-B CPX-900 WiFi Battery & System Analyzer For testing 6 and 12-volt automotive batteries and 12- and 24-volt charging systems User Manual...
- Page 2 Consent to Collection and Use of Data: You agree that Midtronics, Inc. may collect, store, transmit, and use technical data and related information, including but not limited to technical information about this device, system and application software, and accessories, that is gathered periodically to facilitate the provision of product support, product improvements, product development, and other services related to use of this device.
-
Page 3: Controls And Connections
1 – Introduction CPX-900 Controls & Connections Display Screen Cooling Vent Arrow Keys & Power But- Mini-USB Port Thermal Printer (optional) Temperature Sensor VIN Barcode Scanner (optional) ... -
Page 4: Initial Power Up
1 – Introduction CPX-900 Main Menu Icons Icon Description For testing batteries that are connected to and installed in a vehicle. An In Vehicle Test includes a Battery Test and a System (Starter and Charging) Test. In Vehicle Test For testing batteries not connected to or removed from a vehicle. Out of Vehicle Test Access archived test histories or search test history by VIN or by technician. - Page 5 1 – Introduction CPX-900 BMIS Settings At the User Credentials screen, enter the Midtronics-provided username, password, Client ID, and Location ID to access BMIS data management. Use to highlight the numbers on the displayed keyboard and press to select. Press Skip to move to the next step.
-
Page 6: Testing Out-Of-Vehicle
1 – Introduction CPX-900 Testing Out-of-Vehicle The preferred battery test location is In-Vehicle. However, for testing Out-Of-Vehicle: • Always disconnect the negative cable from the battery first and reconnect it last. • Always use a carry tool or strap to lift and transport the battery. Failure to properly install lead terminal adapters, or using adapters that are dirty or worn, may cause false test results. -
Page 7: In Vehicle Test
2 – In Vehicle Test CPX-900 2 – In Vehicle Test Use In Vehicle Test to perform Battery Tests on in-vehicle batteries using test parameters determined by vehicle VIN or through manual entry of battery parameters. A System Test for Starter and Charging testing is also available. In Vehicle Test NOTE:When VIN Entry is enabled (See Chapter 6 - Settings), an In Vehicle Test test will... - Page 8 2 – In Vehicle Test CPX-900 VIN Barcode Scanner Drivers Door Frame Windshield Manual Entry - Use the on-screen keypad to manually type the 17-digit VIN and select Next. Save The displayed digit counter will count up the alphanumeric characters as they are entered. Battery Test Setup - Edit the displayed battery information.
-
Page 9: Battery Test Results
2 – In Vehicle Test CPX-900 Battery Test Results Icons are color-coded to indicate status. Alternator Test Starter Test Battery Test All test parameters were completed Green: Red: The battery has failed the test. and have passed. Some test parameters may require Yellow: Gray: Insufficent data to perform the test. - Page 10 2 – In Vehicle Test CPX-900 Select Send Results displayed at the bottom of the tester screen to send the test results to the optional built-in printer or via email. Select Done to return to the Main Menu. Email Printer System Test Select System Test displayed at the bottom of the screen to continue to the System Test.
-
Page 11: Out Of Vehicle Test
3 – Out Of Vehicle Test CPX-900 3 – Out Of Vehicle Test Use Out Of Vehicle Test to test and verify the condition of a batteries that is not connected to a vehicle.. Out Of Vehicle Test IMPORTANT: To expidite the testing procedure, makes sure Auto Test is enabled. (Chapter 6 - Settings) The testing process begins as soon as the clamps are connected. -
Page 12: Temp Sensor
3 – Out Of Vehicle Test CPX-900 Rating Description Range Cold Cranking Amps (specified by SAE): The 100 to 3000 amount of current a battery can provide at 0 ºF (–17.8 ºC). Cranking Amps: The amount of current a 100 to 3000 battery can provide at 32°F (0 ºC). - Page 13 4 – History CPX-900 4 – History Use History to access the tool usage history, a vehicle history based on VIN, and user histories. The search function can also be used find test records for specific vehicles and technicians. History ...
- Page 14 5 – Messages CPX-900 5 – Messages The Messages function displays alerts and notifications for upcoming tool software updates. Messages Select to return to the previous screen or to return to the Main Menu. Accessing Messages A number is displayed next to the Messages icon when the analyzer has received any critical messages.
- Page 15 6 – Settings CPX-900 6 – Settings Use Setup to setup and adjust the tester display and time, shop and administrative settings, network connectivity, and BMIS settings. Settings Press to return to the previous screen, select options and when necessary, ...
-
Page 16: Print Format
6 – Settings CPX-900 Print Format Set the default to include Shop Info and State Of Health (SoH) information on test result printouts. Use to return to the Display menu. Include Press to check and uncheck the box. A checked box indicates the shop Shop Info information will be included on printed test results. - Page 17 Press to return to the WiFi Settings screen. Manual Manually enter Security, SSID, Password, Encryption, and WEP Keys. Select Connect. BMIS Settings Username Provided by Midtronics Password Provided by Midtronics Client ID Provided by Midtronics Location ID...
-
Page 18: Maintenance And Troubleshooting
7 – Maintenance & Troubleshooting CPX-900 7 – Maintenance & Troubleshooting Tester Cables The test cables that come with your analyzer are consumable items. Cables are like tires in that the more you use them and the harder you drive them, the shorter their useful life. Here are a few things you can do to protect your test cables from damage and premature wear: Cleaning Clamps •... -
Page 19: Printer Paper
The internal printer is shipped with a roll of 2¼" wide by 1 " in diameter thermal printing paper installed. Replacement rolls are available through Midtronics or online office supply websites. NOTE: Due to production variances some paper roll diameters may be too large. -
Page 20: Replacing The Internal Batteries
7 – Maintenance & Troubleshooting CPX-900 Replacing The Internal Batteries Turn the analyzer face down. Use a Phillips screwdriver to remove the screw securing the door to the battery compartment. Battery Cover Screw Lift the door at the tab and place it aside. Remove the discharged batteries. -
Page 21: Appendix A: Recommended Scanning Procedure
Appendix A: Recommended Scanning Procedure CPX-900 Appendix A: Recommended Scanning Procedure The CPX-900 uses an optional 1D/2D barcode scanner built into the back of the tester to scan the VIN of the vehicle being tested. This number is then cross referenced with the original equipment manufacturer's battery specifications stored in the tester's database and displayed on the tester screen. -
Page 22: Appendix B:test Results Decision Tables
Appendix B:Test Results Decision Tables CPX-900 Appendix B:Test Results Decision Tables Battery Test Results Cranking Reserve Decision Description Health Capacity Good Battery Good Battery Battery meets or exceeds required standards. Good Battery Unknown Battery meets or exceeds required standards. Reserve Good Battery Good Good Battery... -
Page 23: Alternator Test Results
Appendix B:Test Results Decision Tables CPX-900 Alternator Test Results Decision Action The output from the alternator is normal. Charging Normal No output detected. Check belts to ensure alternator is rotating when engine is running. √ Check all alternator connections including to the battery. Clean or replace if necessary and retest.