Bowflex Max Trainer M7 Service Manual page 56

7. Using a #2 Phillips screwdriver, remove the 2 indicated screws that
secure the Console Assembly to the Console Handlebar Assembly.
8. Remove the Console Assembly noting how the cables route.
9. Route the cables from the new Console Handlebar Assembly to the
Console Assembly.
10. Installation is the reverse procedure. Do not crimp the Cables.
11. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
56