Bowflex Max Trainer M7 Service Manual page 119

1. With power supplied to the machine, adjust the resistance to the maxi-
mum setting.
2. Unplug the AC Adapter from the wall outlet and machine.
3. Remove the Right Stabilizer Shroud from the machine.
4. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws
and only loosen the lowest indicated screw (arrow) from the Right Fan
Cover.
Note: Loosen the lowest screw by at least 3 full rotations.
5. The Right Fan Cover has a tab that needs to be pushed upward to clear
the loosened screw. While pushing up on the tab, remove the Right Fan
Cover from the assembly.
Note: the Power Cable is attached to the inside of the Right Fan Cover.
Be sure not to crimp the cable by placing
the Right Fan Cover close to the front of the
machine.
To assist with assembly, note that the upper
screw is a machine screw and not a self-tapping
screw.
Power Inlet
119
Power Cable