Console Setup Mode - Bowflex Max Trainer M7 Service Manual

CONSOLE SETUP MODE

The Console Setup Mode lets you view maintenance statistics (Total Run Hours and Software Version) or fully reset the Console.
1. Push and hold down the Volume and PAUSE/STOP buttons for 3 seconds while in the Power-Up Mode to go into the Console Setup Mode.
Note: Push PAUSE/STOP to exit the Console Setup Mode and return to the Power-Up Mode screen.
2. The Console display shows the TOTAL HOURS the machine has operated.
3. Push the ENTER/START button for the next prompt.
4. The Console display shows the Firmware Version prompt.
5. Push the ENTER/START button for the next prompt.
6. The Console display shows the BLE VERSION prompt.
7. Push the ENTER/START button for the next prompt.
8. The Console displays the DISCONNECT BLE prompt.
Note: If you want to disconnect the Bluetooth
option, and push ENTER/START. The Console will exit the Machine Settings Mode and return to the Power-Up Mode screen.
9. Push the ENTER/START button for the next prompt.
10. The Console displays the UPGRADE BLE NO option. This option is for Service Technicians use only.
11. Push the ENTER/START button for the next prompt.
12. The Console displays the UPGRADE SOUND NO option. This option is for Service Technicians use only.
13. Push the ENTER/START button for the next prompt.
14. The Console displays the VIEW ERROR MSG NO option. This option is for Service Technicians use only.
15. Push the ENTER/START button for the next prompt.
16. The Console displays the RESET CONSOLE NO prompt.
Note: If you want to reset the Console to factory settings, push the Increase/Decrease buttons to select the "RESET CONSOLE YES"
option, and push ENTER/START. Turn the machine off when the Console displays the "POWER CYCLE NOW" prompt.
17. Push the PAUSE/STOP button to exit the Console Setup Mode.
The Console will display the Power-Up Mode screen.
transmitter, push the Increase/Decrease buttons to select the "DISCONNECT BLE YES"
®
27