Bowflex Max Trainer M7 Service Manual page 51

6. After noting their location for re-assembly, disconnect the indicated
cables from the Console Board. Do not remove the Cables from the Con-
sole Handlebar Assembly.
Wireless Heart
Rate Module
Cable
Resistance Level
(Increase)
[ Zero Insertion Force (ZIF)
Connector ]
Contact Heart
Rate
Disconnecting the Zero Insertion Force (ZIF) Connectors:
A. Lift the retaining clip.
Zero Insertion Force
Resistance Level
(Decrease)
[ Zero Insertion Force (ZIF)
Connector ]
B. Remove the cable.
(ZIF) Connector
Target Burn Rate
(Decrease)
[ Zero Insertion Force (ZIF)
Connector ]
C. Cable is disconnected from connector.
51
Speaker
Input/Output
Cable
Target Burn Rate
(Increase)
[ Zero Insertion Force (ZIF)
Connector ]