Bowflex Max Trainer M7 Service Manual page 31

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power
cord in a secure location.
1. Unplug the AC Power Adapter from the machine and wait 5 minutes.
2. Using two 6mm hex wrenches, remove the Wheel Assembly from the Pedal Arm. Place the components onto a disposable towel or rag. Be sure
not to get any oil onto your clothing.
In order to avoid possible serious injury when removing the Wheel Assembly, be careful to avoid fingers or hands being caught or
pinched.
Be aware that the Pedal Arms and the Upper Handlebars are connected and when either of these parts move the other does as well.
Wheel Assembly
Pedal Arm
Be sure to remove all of the components of the Wheel Assembly from the
Pedal Arm. (See image for all parts.).
Note: the Larger Washers may stick to the Wheel Bracket on the Pedal
Arm or to the Wheel.
Axle
31
Wheel Bearing
Larger Washer