Bowflex Max Trainer M7 Service Manual page 121

14. At the maximum resistance setting, the outer edge of the Brake Mag-
net should line up with the outer edge of the Brake Disc.
Brake Disc
15. If the Brake Assembly needs to be adjusted, use a 8mm open ended
wrench to loosen the Brake Cable Securing Nut. Turn the Adjustment
Barrel by hand until the magnet is placed correctly.
16. Carefully rotate the Brake Disc. If the Brake Disc does not rub against
the Brake Magnet, skip to step 21.
Keep fingers out of any pinch opportunities when rotating
the Brake Disc.
Brake Magnet
Adjustment Barrel
Brake Cable Securing Nut
Brake Disc
Brake Disc
121
Brake Magnet
Brake Assembly