Haier Smart Power Series Service Manual page 225

Smart Power
Sleeping. This icon is displayed when setting the
sleeping, and left time of sleeping is displayed by
Heat Reclaim Ventilation, This icon is displayed
when setting the heat reclaim ventilation.
Electrical Heating. This icon will display when
electrical heating is set on DC wired controller.
Intelligent Mode.
Cooling Mode.
Heating Mode.
Fan Mode.
Dry Mode.
If the fan speed is set in auto fan, it will change in the
following sequence: Low→Medium→High→Low, AUTO icon
will display simultaneously.
Operation
7.1
Dip Switch Interpretation (for AC)
DIP On/Off
Function
switch station
On Slave wired controller
Sw1
Off Master wired controller
On Ambient temp. display on
Sw2
Off Ambient temp. display off
Collect ambient temp. from PCB of
On
indoor
Sw3
Collect ambient Temp. from wired
Off
controller
On Non-volatile memory invalid
Sw4
Off Non-volatile memory valid
On Fahrenheit
Sw5
Off Celsius
On reserved
Sw6
Off reserved
Model with Up/Down and Left/Right
On
Sw7 swing
Off Model with Up/Down swing
On Fresh Air unit
Sw8
Off General unit
Low Fan Speed.
Medium Fan Speed.
High Fan Speed.
Default
setting
Off
Off
Off
Off
Off
Off
Off
Off
223