Haier Smart Power Series Service Manual page 133

Smart Power
7.1.5 Accessories
Check if the following accessories are included with the unit: See the figure below for the location of the
accessories.
7.2 Selecting installation site
7.2.1 General
• Be sure to provide for adequate measures in order to prevent that the outdoor unit be used as a shelter bye small
animals. Small animals making contact with electrical parts can cause malfunctions, smoke or fire. Please instruct
the customer to keep the area around the unit clean.
• Select an installation site where the following conditions are satisfied and that meets with your customer's
approval.
-Places which are well-ventilated.
-Places where the unit does not bother next-door neighbours.
-Safe places which can withstand the unit's weight and vibration and where the unit can be installed level.
-Places where there is no possibility of flammable gas or product leak.
-The equipment is not intended for using in a potentially explosive atmosphere.
-Places where servicing space can be well ensured.
-Places where the indoor and outdoor unit's piping and wiring lengths come within the allowable ranges.
-Places where water leaking from the unit cannot cause damage to the location (e.g. in case of a blocked drain
pipe)
-Places where the rain can be avoided as much as possible.
-Do not install the unit in places often used as work place. In case of construction works (d.g.grinding works)
where a lot of dust is created, the unit must be covered.
-Do not place any objects or equipment on top of the unit (top plate) .
-Do not climb, sit or stand on top of the unit.
-Be sure that sufficient precautions are taken, in accordance with applicable legislation, in case of refrigerant
leakage.
This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Rubber base
foot
WARNING
NOTICE
131
Installation
manual