Haier Smart Power Series Service Manual page 221

Smart Power
12. SLEEP:
(1) Valid during power on.
(2) The SLEEP time is fixed to 8 hours and is not adjustable.
(3) It is invalid in FAN mode. When setting TIMER ON or TIMER ON to TIMER OFF after setting SLEEP function,
once the timer setting is successful, the SLEEP function will be cancelled; after setting TIMER ON or TIMER ON to
TIMER OFF, the SLEEP function cannot be set. SLEEP function can be set from TIMER OFF to TIMER ON, TIMER
OFF and SLEEP function have priority in canceling the opposite side.
13. HEALTH:
(1) During power-on or power-OFF, press "HEALTH" button to display icon on LCD display, and press "HEALTH"
button again to cancel.
(2) During power-OFF, press "HEALTH" button to enter blowing-in mode, start low wind and HEALTH mode, display
icon .
(3) Switch among modes, and keep HEALTH function.
(4) If HEALTH function is set, power OFF and then on to stay in HEALTH mode.
14. ECO:
(1) Press ECO button and the display will show .
(2) ECO is valid under all modes, it is memorized among switch of all modes.
(3) ECO function power-on or power-OFF is memorized.
15. Turbo/Quiet:
(1) Press button "Turbo" display icon on remote LCD display, display icon of fan speed; Press button
"Quiet" display icon on remote LCD display, display icon of fan speed.
(2) Turbo and QUIET functions can not exist at the same time, the latter will replace the former.
(3) If Turbo function is set, press "SLEEP" button to exit turbo, which means that setting SLEEP function while
canceling turbo function. At the same time, the icon disappears and icon is shown; if QUIET function is set
at present, press button "SLEEP" while QUIET function is still kept.
(4) This function is valid under the mode of COOL or HEAT.
(5) Turbo/QUIET functions are not memorized among switch of all modes/the state of on or OFF.
16. IFP:
(1) Press "IFP" button, display , IFP function is set, and press "IFP" button again to cancel.
(2) Press "Follow/Evade" button, display that expresses following; press it again, display that expresses
evading.
Press it the third time to cancel.
(3) If follow/evade functions are set, air-out angle will change with position of people, so after setting these
functions, Four-side Embedment icons in all sides, up-and-down SWING and left-and-right SWING icons will
disappear.
(4) If air conditioner is in the state of HEALTH airflow, follow/evade functions are set, HEALTH airflow function is
cancelled, Four-side Embedment, up-and-down SWING and left-and-right SWING icons will disappear.
17. FRESH (available for some models):
(1) FRESH function is valid under the state of on or OFF. When air conditioner is OFF, press "FRESH" button,
display icon on LCD display to enter blowing-in mode and low speed. Press "FRESH" button again, this function
is cancelled.
(2) After FRESH function is set, on or OFF functions are kept.
(3) After FRESH function is set, mode switch function is kept.
18. 10°C Heating Function (available for some models) :
This function is valid only under the mode of HEAT, and it is not memorized under the state of on or OFF.
19. HEAT (available for some models) :
(1) When HEAT mode is chosen and is displayed on LCD display, pressing "HEAT" button can cancel and set
HEAT function.
219