Haier Smart Power Series Service Manual page 153

Smart Power
7.13 Accessories
For installation purpose, be sure to use the parts supplied by the manufacturer or other prescribed parts.
The use of non-prescribed parts can cause serious accidents such as the unit falling, water leakage, electric
shock, or fire.
• The following installation parts are furnished. Use them as required.
• Keep this Manual in a safe place and do not discard any other accessories until the installation work has been
completed.
1UH071N1ERG 1UH090N1ERG 1UH105N1ERG 1UH125P1ERG
1UH140P1ERG 1UH160P1ERG 1UH125P1ERK 1UH140P1ERK
No. Name of parts
1 Dred attachmen
2 One-touch bush
Free insulation
3
protection strip
4 Drain connections
5 Instructions
6 Damping rubber pad
7 Cable tie
1UH200W1ERK 1UH250W1ERK
No. Name
Free insulation
1
protection strip
2 Drain connections
3 Instructions
4 Dred attachment
5 Cable tie
6 Cable tie
7 Reducer
WARING
Quantity Descriptions
Used to control entry into
1
dred mode
For power supply cable and
2
connection cable installation
For protecting the
1
Connecting pipe
For Connecting the drain
4
1 Air conditioner operation
Used to reduce vibration of
4
For fixing the power cable
2
and connecting cable
Quantity Descriptions
For protecting the
1 Connecting pipe or
connection cable
For Connecting the drain
3
1 Air conditioner operation
Used to control entry into
1
dred mode
For fixing the power cable
3
and connecting cable
For fixing the power cable
4
and connecting cable
Connecting the outdoor unit
1 and the connecting pipe
when welding
151
pipe
the unit
pipe
Shape
Shape