Table of Contents
Advertisement
PROGR
Purpose
Access the following sub-menus:
■
PG SENSOR (configure the settings of the main sensor and the ANA1 and
ANA2 sensors).
■
PG AL/REL (configure the alarms and the 3 internal relays).
■
PG SERIE (configure the settings of the serial connection and the
backlighting of the LCD display).
■
PG PASSW (configure the access code).
How to access
Follow the steps below (see Figure 14):
1. Press
, then
twice and then
2. Enter the access code (1000 by default).
Use the
button to increase or decrease the value indicated by the cursor.
Use the
button to move to the next character. Confirm by pressing
Figure 19: password required (default password: "1000") to access the PROG sub-
menus. Press ESC repeatedly to return to the reading display.
.
3 – Menus
.
23
Hide quick links:
Advertisement
Table of Contents
