Menu
Sub-menu
PG
PASSW.
MAINT
CALIBRA
Cal sensor
Chgt sens.
Cal CH1
Cal CH2
4-20 mA
INFOS
TEST
Description
Define the code to access
the configuration menus.
Display maintenance-related
settings.
Display the 3 calibration sub-
menus for the main sensor,
the ANA1 sensor and the
ANA2 sensor. Access code
required to access this
menu.
Calibrate the main sensor.
Reset the stored wear rate to
zero after replacing the main
sensor.
Calibrate the ANA1 sensor.
Calibrate the ANA2 sensor.
Override the 4-20 mA output.
Display the serial number,
software version, etc.
Perform gas test without
triggering relays.
3 – Menus
Page
41
42
44
45
47
48
48
49
50
51
15