Indicators - Oldham OLCT 80 User Manual

Side label
This label, located on the housing, includes the following information:
Item Description
1. Thread diameter and pitch of the cable
entries (here 2x M20 and 1x M25)
2. P/N of transmitter (here OLCT80 d
variant) without the sensor cell
3. S/N of transmitter : first two digits (here
17) correspond to the year of
construction (here 2017).
4. Recycling symbol

Indicators

At start-up
The following sequence of indicators/text is displayed:
■
All LCD segments are displayed to ensure that
they are working properly. The
indicators turn on as solid lights.
■
The result of the RAM memory check. The
indicators remain on as solid lights.
■
The result of the flash memory check. The
indicators remain on as solid lights.
■
The result of the EEprom memory check. The
and indicators remain on as solid lights.
■
The stabilization time is then displayed. The
indicator light blinks, while the
is a solid light.
■
The post-stabilization gas concentration and
sensor test are displayed. The
blinks. The indicator light is off.
4
Figure 7: side label
and
and
and
indicator light
indicator light
Figure 8: display sequence at start-up.
2 – Transmitter Overview
1
2
3
9