Taylor-Dunn B0-150-00 Service And Replacement Parts Manual page 26

Lubrication
LUBRICATION AND FLUIDS CHART
Assembly Component
Front Axle:
1: Front springs
2: King pin
3: Ball joint
5: Wheel Bearing
6: Rear springs
Brake Fluid:
Master Cylinder
Linkages:
-
Rear Transaxle:
9: Drive axle
HAZARDOUS WASTE DISPOSAL
This vehicle contains various components and/or fluids that may be classified as hazardous waste.
This includes but is not limited to Lead, Acid, Oil, Grease.
The brake linings originally installed by the factory do not contain asbestos. However, since it is possible that
asbestos brake linings were installed as replacement parts, brake linings should be handled as hazardous
waste.
The requirements for disposal of hazardous waste vary by location. Consult your local regulations regarding
the proper disposal of hazardous waste products.
Page 26
# Capacity Lubricant
2 - NLGI Grade 2 lithium multi-purpose grease
2 - NLGI Grade 2 lithium multi-purpose grease
4 - NLGI Grade 2 lithium multi-purpose grease
2 - NLGI Grade 2 lithium high temp Bearing Grease
2 - NLGI Grade 2 lithium multi-purpose grease
1 DOT 3, Meets or exceeds SAE J1703
3 - Multi-purpose spray lubricant
1 11 oz 30w motor oil
B0-015-00 and MX-016-00
MB-150-03