Taylor-Dunn B0-150-00 Service And Replacement Parts Manual page 19

B0-016-00 and MX-016-00
First 25 hours of Operation
Re-torque wheel nuts.
Inspect all hardware for tightness.
Adjust front wheel bearings.
Every Week
All daily items plus the following:
Check all tires, inflation
Check all tires, damage
Battery electrolyte level
Every Month or 100 hours
All weekly items plus the following:
Adjust park and/or service brake.
Inspect and tighten all power electrical connections.
Brake master cylinder fluid level.
Inspect and tighten all hardware (1st 100 hours then
every 1000 hours).
Check tire tread wear.
Clean batteries and terminals.
Clean charger cooling fins or vents.
Inspect all electrical interlocks for proper operation.
Inspect for fluid leaks.
Clean exterior of drive motor.
Inspect wheel bearings for play and noise.
Tighten steering shaft couplers and/or U-joints.
MB-150-03
Every 6 Months or 500 hours
All monthly items plus the following:
Lubricate the vehicle.
Inspect electrical connections for signs of overheating
Tighten all electrical connections.
Inspect wiring for cracks, fraying, or wear.
Blow carbon from motor.
Inspect motor brushes and commutator.
Clean motor control panel.
Re-torque the wheel nuts.
Inspect steering king pins for play.
Inspect steering linkages and hardware.
Inspect and tighten all hardware.
Test batteries.
Every Year or 1,000 hours)
All 3 month items plus the following:
Inspect brake pads/shoes.
Inspect/adjust front wheel bearings.
Flush hydraulic brake system.
Inspect suspension bushings and bumpers.
Align the front end.
Rotate tires.
Inspect frame for damage.
Every 2 Years or 2,000 hours
All 6 month items plus the following:
Change rear axle oil.
Clean and repack front wheel bearings, change
seals.
PM Schedule
Page 19