Power Connector Cable - HP Pavilion 13 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Power connector cable Mylar light cover
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the power connector cable:
1. Remove the two Phillips M2.5×6.0 screws (1) from the right display hinge, and then rotate the hinge
open as far as possible (2).
2. Remove the Phillips M2.0×2.5 screw (1) from the bracket, and then remove the bracket from on top of
the connector (2).
3. Disconnect the power connector cable from the system board (3).
36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 27).
25).
Spare part number
L37358-001
L45223-001