System Board - HP Pavilion 13 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include a processor and replacement thermal material.
Description
Intel Core i7-8565U processor, 8 GB of system memory, fingerprint reader
Intel Core i5-8265U processor, 8 GB of system memory, fingerprint reader
Intel Core i5-8265U processor, 8 GB of system memory, no fingerprint reader
Intel Core i5-8265U processor, 4 GB of system memory, fingerprint reader
Intel Core i3-8145U processor, 8 GB of system memory, fingerprint reader
Intel Core i3-8145U processor, 4 GB of system memory, fingerprint reader
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Bottom cover (see
b. Battery (see
c. Power connector cable bracket (see
When replacing the system board, be sure to remove the following components from the defective system
board and install them on the replacement system board:
● WLAN module (see
Solid-state drive (see
●
● Fans (see
Heat sink (see
●
Remove the system board:
1. Disconnect the following cables:
(1) Fingerprint reader cable
(2) Power connector cable
(3) Display cable
(4) Speaker cable
(5) USB board cable
(6) Backlight cable
(7) Keyboard cable
Bottom cover on page
Battery on page
WLAN module on page
Solid-state drive on page
Fans on page 31)
Heat sink on page 32)
25)
27)
Power connector cable on page
28)
30)
Spare part number
L37351-xx1
L37350-xx1
L37349-xx1
L37348-xx1
L42277-xx1
L37347-xx1
36)
Component replacement procedures 43