Wlan Module - HP Pavilion 13 Maintenance And Service Manual

WLAN module

Description
Realtek RTL8822BE 802.11ac 2×2 WiFi + Bluetooth 4.2
Intel Wireless-AC 9560 802.11ac 2×2 WiFi + Bluetooth5 (non-vPro)
Intel Wireless-AC 9461 802.11ac 1×1 WiFi + Bluetooth5 (non-vPro)
CAUTION:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The WLAN
antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
2. Remove the Phillips M2.0×3.0 screw (2) that secures the WLAN module to the computer. (The WLAN
module tilts up.)
28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To prevent an unresponsive system, replace the wireless module only with a wireless module
Bottom cover on page
Battery on page
Some models have only one antenna cable.
25).
27).
Spare part number
924813-855
L22634-005
L25889-005