Battery - HP Pavilion 13 Maintenance And Service Manual

Battery

Description
2-cell, 37-WHr, 4.96-AHr, Li-ion battery
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
Remove the battery:
1. Disconnect the battery cable from the system board (1).
2. Remove the six Phillips M2.0×2.5 screws (2) that secure the battery to the computer.
3. Lift the inside of the battery, and then remove the battery from the computer (3).
TIP: When installing the battery, make sure to route the cable in the clips near the top of the battery
(4).
Reverse this procedure to install the battery.
Bottom cover on page 25).
Spare part number
L28076-005
Component replacement procedures 27