Solid-State Drive - HP Pavilion 13 Maintenance And Service Manual

Solid-state drive

Description
512-GB, PCIe, NVMe
256-GB, PCIe, NVMe, TLC
256-GB, PCIe, NVMe
256-GB, SATA-3, TLC
128-GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0×3.0 screw (1) that secures the drive to the computer.
2. Remove the drive (2) by pulling it away from the connector.
Reverse this procedure to install the solid-state drive.
30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 27).
25).
Spare part number
L37357-001
L38076-001
L37356-001
L38042-001
L37355-001