Table of Contents
Advertisement
WLAN module
Description
WLAN module, Intel Dual Band Wireless-AC 7265
IMPORTANT:
and replacement.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery (see
Remove the WLAN module:
1.
Carefully disconnect 2 antenna cables (1).
2.
Remove 1 Phillips 2.0x2.5 screw (2), and then remove the WLAN module (3).
NOTE:
If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective
sleeves should be installed on the antenna connectors, as shown in the following illustration.
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
32).
34).
Spare part number
793840-005
Advertisement
Table of Contents
