Inputslopecorrection[ Span ]; Displayvaluecontentselection[ Disp ]; Bargraphcontentselection[ Bar ] - Autonics DPU Series User Manual

6.2.12 Inputslopecorrection[ SPAN ]
It compensates the slope of the measured 100% input for actual 100% input value.
Output
input signal
(%)
Input type is 4 to 20mA.
When 20mA is applied and the input monitor value displays 99.5%, set SPAN as 0.5 and the input
monitor value is 100.0%.
• Set range: -99.9 to 99.9 (unit: %)
6.2.13 Displayvaluecontentselection[ DISP ],
 bargraphcontentselection[ BAR ]
You can select display value content for the display part and bar graph in RUN mode.
• Display range: load voltage [ LD-U ], load current[ LD-A ], power [ YK ], control input [ REF ]
©CopyrightReservedAutonicsCo.,Ltd.
Actual input signal (%)
6.Parametersettingandfunctions
Actual input signal(%)
Input corrected signal(%)
39