Autonics DPU Series User Manual page 37

Output
(%)
• Single SP[ SP-1 , SP-2 , SP-3 ]
For single SP, set SP-1 , SP-2 , SP-3 to each digital input for output to reach to the relevant SP.
It is available to set individually and duplicated and it is relevant with setting point [ SP1 to SP3 ].
DI-1
SP-1
Output
(%)
• RESET[ RST ]
After selecting RESET function, turn digital input ON(close) and open, this unit resets and re-
starts.
• HOLD[ HOLD ]
After selecting HOLD function and digital input is ON(close), output and display value of this unit
is hold. (it operates hold when digital input maintains ON(close) status.)
©CopyrightReservedAutonicsCo.,Ltd.
※ A, B, C, D, E, F
: Close/Open status of Digital Input
DI-2
SP-2
A: DI-1 is ON
B: DI-2 is ON
C: DI-3 is ON
6.Parametersettingandfunctions
Operation Mode
DI-3
Setting point1 to 3 [ SP1 to SP3 ] parameter
SP-1 (ex:20%)
SP-2 (ex:40%)
SP-3
SP-3 (ex:60%)
37