Autonics DPU Series User Manual page 20

4.Connections
Voltage
Voltage Input
※ 1. Do not mix noise to input cable.
It is recommended to use shield cable,
twisted cable as input cable for effective noise.
※ 2. If there is possible to affect inductive noise,
it is recommended to use shielded cable at high-frequency power for effective noise.
※ 3. DI input switch should be for low current and ON resistance should be max. 20Ω (including cable
resistance).
※ 4. DI input terminals are COM, DI-1 to 3, RUN, AUTO.
※ 5. For remote display unit option model,
use connection cable as our standard cable.
※ 6. When connecting ⑥, ⑪ , it operates as MANUAL. When connecting, ⑥, ⑦, ⑪,
it operates AUTO.
20
Input
External VR
AC POWER IN
LOAD
©CopyrightReservedAutonicsCo.,Ltd.