Changing A Fuse - PEUGEOT 2008 Handbook

Hide thumbs Also See for PEUGEOT 2008:
Table of Contents

Advertisement

In the event of a breakdown
Third brake lamp (LED)
Number plate lamps
To facilitate removal, perform this procedure
with the tailgate half open.
F Insert a thin screwdriver into the cut-out
outside the lens.
F Push it outwards.
F Remove the lens.
F Replace the faulty bulb.
To refit, press the lens to clip it in.
152
Foglamps and reversing lamps
For access, pass your hand under the bumper.
F Turn the bulb holder an eighth of a turn and
pull it out.
F Replace the faulty bulb.
To refit, carry out these operations in reverse
order.
On the left-hand side, be sure not to touch
the exhaust pipe; risk of burns if changing
a bulb after stopping the engine.

Changing a fuse

Access to the tools
The extraction tweezers are fitted to the back
of the dashboard or glove box fusebox cover.
Dashboard
F Unclip the cover by pulling at the top left,
then right.
F Disengage the cover fully and turn it over.
F Remove the carrier on which the tweezers
are fitted.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents