PEUGEOT 2008 Handbook page 49

F Press control 1 to release seat backrest 2.
F Fold seat backrest 2 onto cushion 3.
The seat backrest alone can be folded to
increase the boot loading space. The rear
seat cushion does not fold.
Returning the backrest to
the normal position
F Straighten backrest 2 and secure it.
F Check that the red indicator, located next to
control 1, is no longer visible.
F Unfasten and reposition the outer seat belt
on the side of the backrest.
When repositioning the seat backrest,
take care not to trap the seat belts.
Head restraints
These have a position for use (up) and a
stowed position (down).
They can be removed and are interchangeable
side to side.
To remove a head restraint:
F pull the head restraint upwards as far as
possible,
F then, press the lug A.
Never drive with the head restraints
removed; they must be fitted and correctly
adjusted.
Ease of use and comfort
Ventilation
Air intake
The air circulating in the passenger
compartment is filtered and originates either
from the outside via the grille located at the
base of the windscreen, or from the inside in air
recirculation mode.
Air treatment
The incoming air follows various routes
depending on the controls selected by the
driver:
- direct arrival in the passenger compartment
(air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air
conditioning).
Control panel
The controls of this system are grouped
together on the control panel A on the centre
console.
3
47