Changing A Fuse - PEUGEOT 3008 HYbrif4 Handbook

CHANGING A FUSE

Procedure for replacing a faulty fuse
with a new fuse to rectify a failure of the
corresponding function.
Access to the tools
The fuse extraction tweezer is fi tted
to the back of the dashboard fusebox
cover.
To gain access to it:
remove the cover completely,
remove the tweezer.
Changing a fuse
Before changing a fuse, the cause of
the failure must be identifi ed and recti-
fi ed.
Identify the faulty fuse by checking
the condition of its fi lament.
Good
Use the special tweezer to extract
the fuse from its housing.
Always replace the faulty fuse with a
fuse of the same rating.
Check that the number etched on
the box, the rating etched on the
fuse and the tables below all agree.
Installing electrical
accessories
Your vehicle's electrical sys-
tem is designed to operate with stan-
dard or optional equipment.
Before installing
equipment or accessories on your
vehicle, contact a PEUGEOT dealer.
PEUGEOT
responsibility for the cost in-
Failed
curred in repairing your ve-
hicle or for rectifying malfunctions
resulting from the installation of ac-
cessories not supplied and not rec-
ommended by PEUGEOT and not
installed in accordance with its in-
structions, in particular when the
combined consumption of all of the
additional equipment connected ex-
ceeds 10 milliamperes.
other electrical
will not accept
179