Spare Wheel - PEUGEOT 2008 Handbook

In the event of a breakdown

Spare wheel

Scan the QR code on page 3 to view
explanatory videos.
Procedure for changing a damaged wheel with
the spare wheel using the tools provided with
the vehicle.
Access to the tools
144
The tools are installed in the boot under the
floor.
To gain access:
F open the boot,
F lift the floor and remove it,
F remove the polystyrene spacer,
F remove the carrier box containing the tools.
List of tools
(Depending on the country where the product
is sold.)
1. Wheelbrace.
For removing the wheel trim and the wheel
fastening bolts.
2. Jack with integrated handle.
Used to raise the vehicle.
3. "Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.
4. Socket for the security bolts (located in the
glove box).
For adapting the wheelbrace to the special
"security" bolts.
5. Removable towing eye.
For more information on Towing the vehicle,
refer to the corresponding section.
Wheel with wheel trim
When refitting the wheel, refit the wheel
trim starting by placing its notch facing the
valve and press around its edge with the
palm of your hand.
All of these tools are specific to your
vehicle and may vary according to the
level of equipment.
Do not use them for any other purposes.