PEUGEOT 2008 Handbook page 147

The jack must only be used to change
a wheel with a damaged or punctured tyre.
Do not use any jack other than the one
supplied with this vehicle.
If the vehicle does not have its original
jack, contact a PEUGEOT dealer or a
qualified workshop to obtain the correct
jack for it.
The jack meets European standards,
as defined in the Machinery Directive
2006/42/EC.
The jack does not require any
maintenance.
Access to the spare wheel
(Depending on the country where the product
is sold.)
The spare wheel is located in the boot under
the floor.
The spare wheel is a steel wheel or a "space-
saver" type wheel, depending on the country
of sale.
It is secured by a fastening device comprising
a nut A and a bolt B.
Taking out the wheel
F Unscrew the (coloured) central nut.
F Remove the fastening device (nut and bolt).
In the event of a breakdown
F Raise the spare wheel towards you from the
rear.
F Take the wheel out of the boot.
Putting the wheel back in place
F Put the wheel back in its housing.
F Give the (coloured) central nut on the bolt
a few turns to loosen it.
F Position the fastening device (nut and bolt)
in the middle of the wheel.
F Tighten fully until the central nut clicks, to
retain the wheel correctly.
8
145