In the event of a breakdown
Towing your vehicle
F On the front bumper, unclip the cover by
inserting the flat end of the towing eye in the
slot at the bottom of the cover.
F Screw the towing eye in fully.
F Install the towbar.
F Put the gear lever into neutral.
Failure to follow this instruction may
cause damage to some components
(braking, transmission, etc.) and the
absence of braking assistance when
the engine is restarted.
162
F Unlock the steering by turning the key in
the ignition by one notch and release the
parking brake.
F Switch on the hazard warning lamps on
both vehicles.
F Set off gently and drive slowly for a short
distance.
Towing another vehicle
F On the rear bumper, unclip the cover by
pressing at the bottom.
F Screw the towing eye in fully.
F Install the towbar.
F Switch on the hazard warning lamps on
both vehicles.
F Set off gently and drive slowly for a short
distance.