PEUGEOT 2008 Handbook page 188

PEUGEOT Connect Radio
Press the "OPTIONS" button to go to the
secondary page.
Press "Ring volume" to display the
volume bar.
Press the arrows or move the cursor
to set the ring volume.
Settings
Profile settings
As a safety measure and because it
requires the sustained attention of the
driver, changes to settings must only be
done with the vehicle stationary.
Press Settings to display the
primary page.
Press "Profiles".
Select "Profile 1" or "Profile 2" or "Profile 3"
or "Common profile".
Press this button to enter a name for
the profile using the virtual keypad.
Press "OK" to save.
16
Press the back arrow to confirm.
Press this button to activate the
profile.
Press the back arrow again to
confirm.
Press this button to initialise the
profile selected.
Adjusting the brightness
Press Settings to display the
primary page.
Press Brightness.
Move the cursor to adjust the
brightness of the screen and/or of
the instrument panel (according to
version).
Press in the grey zone to confirm.
Modifying the system
settings
Press Settings to display the
primary page.
Press "Configuration" to go to the
secondary page.
Press "System configuration".
Press the "Units" tab to change the units of
distance, fuel consumption and temperature.
Press the "Factory settings" tab to return to
the initial settings.
Returning the system to factory settings
activates the English language by default
(depending on version).
Press the "System info" tab to display the
versions of the different modules installed in
the system.
Press the "Privacy" tab,
or
Press Settings to display the
primary page.
Press "Privacy" to activate or
deactivate the privacy data mode.