Speed Limiter - PEUGEOT 2008 Handbook

Driving
Snow chains
The system does not have to be
reinitialised after fitting or removing snow
chains.
Malfunction
The flashing and then fixed illumination of the
under-inflation warning lamp, accompanied by
the illumination of the Service warning lamp,
indicates a fault with the system.
In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.
After any intervention on the system,
the pressures of the four tyres must be
checked and the system reinitialised.

Speed limiter

System which prevents the vehicle from
exceeding the speed programmed by the
driver.
Once the speed limit is reached, the
accelerator pedal no longer has any effect.
108
The speed limiter is switched on manually: the
programmed speed must be at least 19 mph
(30 km/h).
The speed limiter is switched off by manual
operation of the control.
The programmed speed can be exceeded
temporarily by pressing the accelerator pedal
firmly.
To return to the programmed speed, simply
slow down to a speed below the programmed
speed.
The programmed speed remains in the system
memory when the ignition is switched off.
The speed limiter system cannot in
any circumstances replace the need
to observe speed limits or the need for
vigilance on the part of the driver.
Steering mounted controls
1. Speed limiter mode selection/off.
2. Increases the set value.
3. Decreases the set value.
4. Speed limiter on/pause.
Displays in the instrument
panel
The programmed information is grouped
together in the instrument panel screen.
5. Speed limiter on/off indication.
6. Speed limiter mode selection indication.
7. Programmed speed value.
8. Selection of a memorised speed setting.