PEUGEOT 2008 Handbook page 59

To use it in row 2:
F fold or remove the load space cover,
F open the covers of the upper fixings 2,
F unroll the high load retaining net,
F position one of the ends of the net's metal
bar in the corresponding upper fixing 2, then
do the same with the other end,
F attach the hook of each of the net's straps in
the corresponding lower ring 4,
F tighten the straps,
F check that the net is hooked and tensioned
correctly.
Never use the ISOFIX ring corresponding
to the fixing of the upper strap of a child
seat with Top Tether.
Load space cover
This consists of two sections which can be
folded on each other.
To store it, fold it on itself and place it at the
bottom of the boot.
To gain access to the boot from the rear seats:
F raise the front section of the load space
cover using the grip A.
Ease of use and comfort
When sharp deceleration occurs, objects
placed on the load space cover can turn
into projectiles.
Warning triangle (storage)
The location for stowing a folded triangle or its
storage box is under the front seat or under the
boot carpet (depending on version).
Before leaving your vehicle to set up and
install the triangle, switch on the hazard
warning lamps and put on your high
visibility vest.
The dimensions of the triangle (once folded) or
its storage box must be:
- A: length = 438 mm,
- B: height = 56 mm,
- C: width = 38 mm.
3
57