PEUGEOT 2008 Handbook page 148

In the event of a breakdown
F Put the carrier box back in place in the
centre of the wheel and clip it.
F Put the polystyrene storage box back in
place.
If there is no wheel in the well, the
fastening device (nut and bolt) cannot be
refitted.
146
Removing a wheel
Parking the vehicle
Park the vehicle where it does not block
traffic: the ground must be level, stable
and non-slippery.
Apply the parking brake.
Switch the ignition off.
With a manual gearbox, engage first gear
to block the wheels.
With an electronic gearbox, place the
lever in position R to block the wheels.
With an automatic gearbox, place the
lever in position P to block the wheels.
Check for fixed illumination of the parking
brake warning lamps in the instrument
panel.
Make absolutely certain that all the
occupants have left the vehicle and are
waiting in a safe area.
Never go underneath a vehicle raised
using a jack; use an axle stand.
List of operations
F To remove the wheel bolt cover on each
of the bolts, use tool 3 (depending on
equipment).
F Fit the security socket 4 on the wheelbrace
1 to slacken the security bolt (depending on
equipment).
F Slacken the other bolts using the
wheelbrace 1 only.