PEUGEOT 2008 Handbook page 155

Glove box
F Open the glove box lid.
F Unclip the fusebox cover by pulling at the
top right.
F Disengage the cover fully and turn it over.
F Remove the carrier on which the tweezers
are fitted.
Before changing a fuse:
F immobilise the vehicle and switch off the
ignition,
F all electrical consumers must be switched
off,
F identify the failed fuse using the allocation
tables and the diagrams given in the
following pages.
To remove or fit a fuse, it is essential to:
F use the special tweezers to extract the fuse
from its housing and check the condition of
its filament.
F always replace the failed fuse with a fuse
of the same rating (same colour); use of a
different rating may cause malfunctions
(risk of fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a PEUGEOT dealer or a qualified workshop.
Good Failed
Tweezers
Professional repairers: for full information
on the fuses and relays, consult the
"Methods" wiring information and diagrams
available from a PEUGEOT dealer.
In the event of a breakdown
The fuse allocation tables and the
corresponding diagrams are available
from a PEUGEOT dealer or from a
qualified workshop.
The replacement of a fuse not shown in
the allocation tables below may cause
a serious malfunction of your vehicle.
Contact a PEUGEOT dealer or a qualified
workshop.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a PEUGEOT dealer or a qualified
workshop.
PEUGEOT accepts no responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories
not supplied and not recommended by
PEUGEOT and not installed in accordance
with specifications, in particular when the
combined power consumption of all of the
additional equipment connected exceeds
10 milliamperes.
8
153