Speed Limiter - PEUGEOT BOXER 2018 Handbook

Speed limiter

The system prevents the vehicle
from exceeding the speed setting
programmed by the driver.
Speed selection is made with the vehicle
stationary and the engine running or with
the vehicle moving and 2nd gear or higher
engaged.
The minimum speed that can be programmed
is 19 mph (30 km/h).
The vehicle responds to the driver's foot
pressure on the accelerator until resistance is
felt in the pedal, which signifies that the vehicle
has reached the programmed speed.
However, pressing the pedal beyond this point
of resistance to the floor permits exceeding
the programmed speed. To resume use of
the limiter, simply reduce the pressure on
the accelerator pedal gradually and return to
a speed below the programmed speed.
1. Selecting the limiter function.
2. Activation/deactivation of the function.
3. Programming a speed.
The function selection status and the
programmed speed are displayed in the
instrument panel screen.
The speed limiter is a driving aid that
cannot, in any circumstances, replace the
need to observe speed limits or the need
for vigilance on the part of the driver.
Selecting the function
F Turn the ring fully downwards.
The speed limiter is selected but
is not yet active.
The display indicates OFF and the last
programmed speed.
Programming a speed
A speed can be programmed without activating
the limiter but with the engine running.
To enter a speed higher than the previous one:
F Move the control up (+).
A short press increases the speed by 1 mph
(km/h).
Holding it increases the speed in steps of
5 mph (km/h).
To enter a speed lower than the previous one:
F Move the control down (-).
A short press decreases the speed by 1 mph
(km/h).
Holding it decreases the speed in steps of
5 mph (km/h).
Driving
6
99