Voltage Class; Voltage Tolerance; Watts Loss - Allen-Bradley PowerFlex 70 Reference Manual

Voltage Class

Voltage Tolerance

Watts Loss

PowerFlex drives are sometimes referred to by voltage "class." This class identifies
the general input voltage to the drive. This general voltage includes a range of
actual voltages. For example, a 400 Volt Class drive will have an input voltage
range of 380-480VAC. While the hardware remains the same for each class,
other variables, such as factory defaults, catalog number and power unit ratings
will change. In most cases, all drives within a voltage class can be reprogrammed
to another drive in the class by resetting the defaults to something other than
"factory" settings. The [Voltage Class] parameter can be used to reset a drive to a
different setup within the voltage class.
As an example, consider a 480 volt drive. This drive comes with factory default
values for 480V, 60 Hz with motor data defaulted for U.S. motors (HP rated,
1750 RPM, etc.) By setting the [Voltage Class] parameter to "low Voltage" (this
represents 400V in this case) the defaults are changed to 400V, 50 Hz settings
with motor data for European motors (kW rated, 1500 RPM, etc.). Refer to
Figure 61.
Refer to the Powerflex 70 Technical Data (publication 20A-TD001) or
PowerFlex 700 Technical Data (publication 20B-TD001) for details.
Refer to the Powerflex 70 Technical Data (publication 20A-TD001) or
PowerFlex 700 Technical Data (publication 20B-TD001) for Watts Loss
information.
Rockwell Automation Publication PFLEX-RM001H-EN-P - June 2013
Voltage Class
207