Canon F1 Service Manual page 85

4
Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
6-1) Remove the Reader Fixation Plate (R) [1] (Upright Control Panel model).
• 1 Screw [2]
• 2 Bosses [3]
6-2) Open the Wire Saddle [1], lift the Control Panel Cable [2] and the Power Supply Cable [3],
and then remove the Reader Fixation Plate (R) [4] (Flat Control Panel model only).
• 1 Screw [5]
• 2 Bosses [6]
4 Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
[1]
[3]
[3]
[2]
F-4-15
[4]
[1]
[2]
[6]
[5]
[3]
[6]
F-4-16
7) Remove the Reader Fixation Plate (L) [1].
• 1 Screw [2]
• 2 Bosses [3]
[1]
[3]
[3]
[2]
8) Open the DADF, and remove the Face Cover [1].
• 1 Claw [2]
• 1 Hook [3]
[1]
[3]
[2]
4-9
F-4-17
F-4-18
4-9