Canon F1 Service Manual page 88

4
Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
CAUTION:
Points to note when installing/removing the DADF + Reader Unit.
• Do not trap the Reader Power Supply Cable [2] and the Reader Communication
Cable [3].
• Be careful not to break the Dust Collection Cups [4].
• Be careful not to break the Wire Saddle [5].
[2]
[3]
[1]
4 Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
15) Remove the DADF + Reader Unit [1] from the 2 pins [2] of the host machine, and place it
temporarily while being shifted for approx. 45mm toward left side of the host machine.
[4]
[5]
F-4-25
[2]
45mm
4-12
[1]
F-4-26
4-12