Canon F1 Service Manual page 163

NOTE:
When placing the Reader Unit on the Flat Control Panel model, be sure to remove the
Protection Sheet of the Control Panel if it is not removed.
2) Lift the ADF Reader Unit temporarily placed with 2 people or more.
CAUTION:
When lifting the Reader Unit, be sure to hold the position indicated in the figure.
3) Mount the Reader Unit from front side of the host machine, and place it temporarily while
approx. 45 mm shifted toward left side of the host machine.
45 mm
6
Installation > Installation Procedure > Connecting this Machine
F-6-16
6 Installation > Installation Procedure > Connecting this Machine
4) Remove the Reader Support Plate B. (The removed plate will be used in step 7.)
• 1 Screw (It will be used in step 8.)
Screw
Reader Support Plate B
F-6-15
Reader Support
Plate B
6-7
F-6-17
6-7