Cleaning The Lead Roller 2/Lead Roller 3 - Canon F1 Service Manual

4
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Lead Roller 2/Lead Roller 3 > Procedure

Cleaning the Lead Roller 2/Lead Roller 3

■ Preparation
1) Remove the DADF Scanner Unit (Refer to page 4-36).
■ Procedure
CAUTION:
Be sure not to touch the surface of the roller when disassembling/assembling.
Cleaning the Lead Roller 2
1) Wipe the Lead Roller 2 [2] with wet and tightly-wrung lint-free paper [3] by turning the Jam
Removal Dial [1] until it is clean.
[1]
4 Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Lead Roller 2/Lead Roller 3 > Procedure
[3]
[2]
F-4-150
Cleaning the Lead Roller 3
2) Wipe the Lead Roller 3 [2] with wet and tightly-wrung lint-free paper [3] by turning the Jam
Removal Dial [1] until it is clean.
[3]
4-55
[2]
[1]
F-4-151
4-55