Canon NEW F-1 Service Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Digital Camera
  5. NEW F-1
  6. Service manual

Canon NEW F-1 Service Manual

Hide thumbs Also See for NEW F-1:
Table of Contents

Advertisement

Quick Links

Canon NEW F-1 Service manual
CANON NEW F-1
SERVICE MANUAL
EXPLODED VIEWS
AND
PARTS LIST
CANON INC. JAPAN
Page 1

Advertisement

Table of Contents
loading

Related Manuals for Canon NEW F-1

Summary of Contents for Canon NEW F-1

  • Page 1 Canon NEW F-1 Service manual CANON NEW F-1 SERVICE MANUAL EXPLODED VIEWS PARTS LIST CANON INC. JAPAN Page 1...

  • Page 2: Table Of Contents

    Canon NEW F-1 Service manual Contents SWITCH POSITION AND NOMENCLATURE ....................4 COVERS ................................6 FRONT PANEL UNIT ATTACHMENT AND REMOVAL ................10 FRONT BODY ..............................12 UPPER BODY (WINDING SIDE)........................16 TUNGSTEN CABLE ADJUSTMENT ......................19 SPOOL ................................. 20 SPROCKET .................................
  • Page 3 Canon NEW F-1 Service manual Introduction The NEW F-1 is the base of a completely new Integrated Functional System. It is based on the original F-1 but utilizing many advances in electronics, precision machining and precision optics made since the original F-1 was developed ten years ago.

  • Page 4: Switch Position And Nomenclature

    Canon NEW F-1 Service manual 1. Switch position and nomenclature Name Operation Metering Switch ON: Metering activated Release Switch ON: Starts Release sequence Count Switch OFF: Shutter exposure timing starts Winding Complete Switch OFF: Winding complete Stop-down (S.D.) Switch ON: Stopped-down (ganged with SWll...
  • Page 5 Canon NEW F-1 Service manual 1) SW12 and SW18 Relationship 2) SW16 and SW16' Relationship 1st curtain X contact must turn off after the 2nd curtain closes and before winding is complete. 3) SW11, SW6 and SW11’ Relationship Lens "A"...

  • Page 6: Covers

    Canon NEW F-1 Service manual 2. Covers Numbers 1-37 Page 6...
  • Page 7 Canon NEW F-1 Service manual Disassembly Notes Assembly and Adjustment Notes 1. Remove the smooth face screw (3) and shutter button (6) with tool (CY9-6131-000). 4. Place teflon washer (8) under the lock lever 2. Be careful not to lose detent (7).
  • Page 8 Canon NEW F-1 Service manual Assembly and Adjustment Notes 7. Adjust the rewind crank (22) slip torque by changing the friction washer (21). Torque Limits: 35 to 55 gcm. 8. Lubricate both sides of friction spring (20) with PL-015. 9. Hold the rewind fork. Raise the rewind crank knob and turn in the rewind direction.
  • Page 9 Canon NEW F-1 Service manual Assembly and Adjustment Notes 12. SV Brush Adjustment 12.1. Set the SV (ASA.) dial to ASA 6400 -1/3. 12.2. Set the exposure compensation dial at "1". 12.3. Check the position of the brush through the P.C. terminal hole.

  • Page 10: Front Panel Unit Attachment And Removal

    Canon NEW F-1 Service manual 3. Front panel unit attachment and removal Disassembly Notes Assembly and Adjustment Notes AE Joint Gear and AE Coupler To remove the front panel unit, remove the Installation following parts. Remove the top covers, mount apron and bottom cover.
  • Page 11 Canon NEW F-1 Service manual Disassembly Notes Assembly and Adjustment Notes In the order shown in figure 2, set the 13. If the SV board is to be removed, levers as shown in figure 3. remove the white cord from the P.C.

  • Page 12: Front Body

    Canon NEW F-1 Service manual 4. Front body Numbers 1-16 Page 12...
  • Page 13 Canon NEW F-1 Service manual Disassembly Notes Assembly and Adjustment Notes 1. To remove the main circuit board (6), the 4. Clean the connector portions of the resistor lower body flex must be moved slightly. board (R Board) (9) and main circuit board (6) (rear side) and apply electrolub.
  • Page 14 Canon NEW F-1 Service manual Assembly and Adjustment Notes Attach the light shield (12) and seal (13) as shown. Pentaprism Contact Installation 9.1. Don't interchange the position of the left and right contacts, or reverse either of them. 9.2. Solder the leads as quickly as possible.
  • Page 15 Canon NEW F-1 Service manual Assembly and Adjustment Notes 11. Front Panel Lead Soldering 11.1. Put flux on the main circuit board solder lands. 11.2. Solder from the bottom up. 11.3. Dress extra lead toward the bottom as shown. Note: The thick white lead goes to the P.C.

  • Page 16: Upper Body (Winding Side)

    Canon NEW F-1 Service manual 5. Upper Body (Winding side) (6) can be displaced without removing (1) - (5) Page 16...
  • Page 17 Canon NEW F-1 Service manual Disassembly Note Assembly and Adjustment Notes 1. Shutter Speed Selector 1. The shutter speed selector (6) TV double 1.1. To remove the shutter speed selector brushes must be aligned both vertically (6), unsolder the black lead from SW4...
  • Page 18 Canon NEW F-1 Service manual Assembly and Adjustinent Notes 4. Winding Unit (9) Installation 4.1. Lubricate the winding coupler joint with MIL-G. 4.2. Lubricate the friction surfaces of the idler gear and frame counter drive claw with Lozoid 72090. 4.3.

  • Page 19: Tungsten Cable Adjustment

    Canon NEW F-1 Service manual 6. Tungsten cable adjustment Assembly and Adjustment Notes 1. Put the knotted end of the cable into the slot in the indicator pulley. Charge the pulley one revolution and temporarily install a pin to hold it.

  • Page 20: Spool

    Canon NEW F-1 Service manual 7. Spool Steel Balls 3,5,7,9 Lozoid 72090 Page 20...
  • Page 21 Canon NEW F-1 Service manual Disassembly Notes Be careful not to loose any of the bearing balls inside the camera. (See the facing page for the number of balls in each location.) Assembly and adjustment Winding Coupler (4) With the shutter completely wound {winding stopper engaged) , the winding coupler should be positioned as shown (10°...

  • Page 22: Sprocket

    Canon NEW F-1 Service manual 8. Sprocket Assembly and adjustment notes 1. Lubricate the upper and lower sprocket bushings with PL-015. 2. Adjust thrust play to 0.1 to 0.2mmm with washer (8). 3. Align the toothless section of the main gear with the stopper notch in the sprocket shaft (3) 4.

  • Page 23: Checks And Adjustments

    Canon NEW F-1 Service manual 9. Checks and adjustments Assembly and Adjustment Notes 1. Shutter Curtains Installation 1.1. In the wound condition, the leading edge of the 2nd curtain should be from 5.4 to 5.9mm from the edge of the film aperture.
  • Page 24 Canon NEW F-1 Service manual Assembly and Adjustment Notes 2.2. Curtain Brake Adjustment From the maximum curtain travel position, wind, release the shutter with the seesaw lever at "B", and check the difference in the position where the curtain stops and the maximum curtain travel position. It should be no more than half- a-tooth on the master gear.
  • Page 25 Canon NEW F-1 Service manual Adjustment Notes 4. SW4 OFF Timing Clean the contact surface with keton. Slowly push the 1st curtain release lever in the "A" direction and note where the latch is released. Adjust the switch with the eccentric so that SW4 goes off at 0.1 to 0.2mm additional travel.
  • Page 26 Canon NEW F-1 Service manual Adjustment Notes 7. Mechanical Release Stroke Adjustment The shutter should release at 1.4±0.15mm of the shutter button stroke. Adjust with the eccentric. 8. "Bulb" Pin Adjustment Adjust so that at 1.25mm of the shutter button stroke the "bulb"...
  • Page 27 Canon NEW F-1 Service manual Adjustment Notes 11. Mechanical Shutter 11.1 Curtain Travel Time 1) Standard: 7.5±0.2ms (1/1000)(34mm slit spacing). 2) Adjustment: Spring Drum Gear 11.2 Shutter Speed (Exposure Time) 1) Adjust at 1/250 using the 2nd Curtain Release Lever (Seesaw Lever) Turning the seesaw eccentric CW increases shutter speed.
  • Page 28 Canon NEW F-1 Service manual Adjustment Notes 14. Maximum Aperture (AVO) Indicator 14.1 Set AVO= 2.8 (Max. Aperture Pin Height = 6.9±0.03mm) 14.2 Bend the lever (dwg.) so that the top of the red mark is positioned within the hatched area.
  • Page 29 Canon NEW F-1 Service manual Adjustment Notes 17. Following Needle Hidden Position 17.1 Activate the stop-down lever, with the lens on or off of "A", the following needle must not be visible. 17.2 Push the stop-down lever back into the normal position.
  • Page 30 Canon NEW F-1 Service manual Adjustment Notes 19. SW 18, X Sync Check and Adjustment 19.1 X Contact Check When winding from the maximum curtain travel position (MCTP), the contact separation is 0.3mm when the brake claw is on the third ratchet tooth.

  • Page 31: Upper Body (Rewind Side)

    Canon NEW F-1 Service manual Upper body (rewind side) Number 1-13 Page 31...
  • Page 32 Canon NEW F-1 Service manual Disassembly Notes Assembly and Adjustment Note 1. SV Circuit Board (S Board)* 1. SV Ckt. Board If the SV circuit board need only be moved out of the way: SV contact height = 3-4mm Remove three screws,...
  • Page 33 Canon NEW F-1 Service manual Assembly and Adjustment Notes Make sure the connector legs are correctly aligned with the solder lands on the main ckt. board and then solder them together. 6. When installing the meter/indicator unit (5) + (6), make sure the meter needle clears the red mark on the AVC indicator (7).

  • Page 34: Lower Body (I)

    Canon NEW F-1 Service manual Lower body (I) Numbers 1-22 Page 34...
  • Page 35 Canon NEW F-1 Service manual Disassembly Assembly and Adjustment Notes 1. The mounting screw (7}-l for Mg2 is hidden under the lead solder connection. 2. Mg2 Lead is a single solid, lead. Take care not to kink the cable. 3. The shorter hook of the main diaphragm...
  • Page 36 Canon NEW F-1 Service manual Assembly and Adjustment Notes Winding Stopper and Charge Lower Check After installing (15) through (17) check the following points. 1) Winding Latch Overcharge: 0.3mm or more 2) When the SW5 pin is moved, the stopper lever must move smoothly without catching.
  • Page 37 Canon NEW F-1 Service manual Assembly and Adjustment Notes 5. Mirror Charge Timing Wind until the hook (see dwg.) on the mirror mechanism side of the front panel is set (The hook is easier to see if the battery box is removed).

  • Page 38: Lower Body Lubrication

    Canon NEW F-1 Service manual Lower body lubrication Lozoid 72090 at //// points Page 38...

  • Page 39: Lower Body (Ii)

    Canon NEW F-1 Service manual Lower body (II) Numbers 1-10 5 - 10 can be assembled or disassembled independently Page 39...
  • Page 40 Canon NEW F-1 Service manual Disassembly Notes Assembly and Adjustment Notes 1. Mg3 When current flows through the coil To remove Mg3 (1), remove screw the armature closes to the yoke. (1)-1. Open the armature and remove (l)-2 using a small cross- 2.
  • Page 41 Canon NEW F-1 Service manual Assembly and Adjustment Notes 4. 2nd Curtain Latch Adjustment Unsolder the data back direct contact and run keton (MEK) in around it. Push the contact out from the inside. Push on the armature lever and check the latch mesh. (Fig. 1) Adjust the overlap to the limit shown in figure 2.

  • Page 42: Electrical Adjustments

    Canon NEW F-1 Service manual Electrical adjustments Introduction and Contents There are many electrical checks and adjustments for this camera, but they need not all be checked every time work is performed on the camera. The following table is a combined table of contents and guide to pertinent checks depending on the type of repair performed.
  • Page 43 Canon NEW F-1 Service manual Assembly and Adjustment Notes 1. Offset Offset Voltage Check 1) Unsolder one end of the RTC resistor 2) Short pins 9 and 11 . 3) Measure the voltage from pin 10 to Gnd. (V1). 4) Measure the voltage from pin 11 to Gnd. (V2).
  • Page 44 Canon NEW F-1 Service manual Assembly and Adjustment Notes (R43) Adjustment If the oscillator is not within limits, proceed as follows. 1) Remove the ROSC resistor and replace it temporarily with an approximately 200kohm variable resistor. 2) Adjust the variable resistor until the shutter speed is within limits. Remove the variable and measure it.
  • Page 45 Canon NEW F-1 Service manual Assembly and Adjustment Notes Shutter VR3 Output Shutter VR3 Output speed speed 1/2000 1.3461*VC ¼ 0.6538*VC 1/1000 1.2692*VC ½ 0.5769*VC 1/500 1.1923*VC 1” 0.5000*VC 1/250 1.1153*VC 2” 0.4230*VC 1/125 1.0384*VC 4” 0.3461*VC 1/60 0.9615*VC 8”...
  • Page 46 Canon NEW F-1 Service manual Assembly and Adjustment Notes Reference 7. VR GAIN (VR 2) Adjustment Mount the tool standard FD5C/1.4, standard focusing screen (PE) and pentaprism. Check the output at #3 (Fig. 3) with the light source at EV 9 and EV 15 and record the values as V EV9 and V EV15.
  • Page 47 Canon NEW F-1 Service manual Assembly and Adjustment Notes 9. VR TV (VR 6) Level Adjustment Set the aperture to f/5.6 (AVS=5), the shutter speed to "A" and the EV Tester light source to EV12. Release the shutter and adjust VR6 so the exposure tester reads 0 ±.0.1 EV Another method is to check the voltage (V TV) at Fig.
  • Page 48 Canon NEW F-1 Service manual Assembly and Adjustment Notes 13. R MTV2 (JUS) Adjustment 13.1 Check the internal resistance of the ammeter ''A". 13.2 Add a dummy resistor to make the interval resistance + dummy resistor = 330ohm. 13.3 Set the shutter to "A" and the aperture to f/5.6 (AV5).
  • Page 49 Canon NEW F-1 Service manual Assembly and Adjustment Notes 14. R AE Selection and Installation 14.1 Set the light source to LV 12.6 (819.6), the aperture to f/8 (AV 6) and shutter to 1/125 (TV 7). Note: If light source cannot be set to 12.6, set the aperture to f/6.7 (AV 5.5) and the light source to LV 12.

  • Page 50: Front Panel Unit Assembly And Disassembly

    Canon NEW F-1 Service manual Front panel unit assembly and disassembly Numbers 1-24 Page 50...
  • Page 51 Canon NEW F-1 Service manual Disassembly Notes Assembly and Adjustment Notes Check that the height of the pin in the 1. Do not bend the brush contacts on VR relaxed position is 5.7± 0.05mm below AOAC (VR 9) wiper (3).
  • Page 52 Canon NEW F-1 Service manual Assembly and Adjustment Notes Attach spring (10) to hooks of (15) and (21) and spring (5) to hooks of (13) and (7). Check that the stop-down slide operates normally. 6. Lubricate the cam surface of the stop-down lock lever with UTLM-10.
  • Page 53 Canon NEW F-1 Service manual Numbers 1-9 Page 53...
  • Page 54 Canon NEW F-1 Service manual Assembly and Adjustment Notes 4. Following needle lever 1. Lubricate all lever pivot shafts with MIL-G. Slip the end of the following needle lever (7) under the resistor section 2. Lubricate the friction surfaces (///// of AE unit.
  • Page 55 Canon NEW F-1 Service manual Numbers 1-13 Page 55...
  • Page 56 Canon NEW F-1 Service manual Assembly and Adjustment Notes 1. Mirror Lubricate the mirror hinge with UTLM-10. Mirror (1) thrust play should be between 0.05 to 0.25mm. Adjust collar (1)-3. Mirror (1) must move smoothly under its own weight. 2. Pentaprism Contacts Soldering time to the pentaprism contacts (2) and (3) should be kept as short as possible to avoid loosening of the contacts in their plastic seats.
  • Page 57 Canon NEW F-1 Service manual 7. Light Shields Both light shields (10) and (14) have heat-sealed edges to prevent fraying, Light shield (14) should stand away from the frame light shield (13) by 2 to 3 mm. Heat it with a soldering iron to shape it correctly.
  • Page 58 Canon NEW F-1 Service manual Assembly and Adjustment Notes 1st Curtain Release (Mirror Release) Move the mirror charge lever in the direction shown at the right. Move the lever until the mirror is at mid- position, then set the 1 curtain release lever as shown.
  • Page 59 Canon NEW F-1 Service manual Assembly and Adjustment Notes 4. VR AOAC (VR9) Wiper Adjustment In the relaxed position (AVO=5.6) the pin height* should be 5.7 ± 0.05mm. *: Pin height is repair jargon. In the case of lenses, it is correct, since the pin protrusion above the standard mount surface if measured.
  • Page 60 Canon NEW F-1 Service manual Assembly and Adjustment Notes Check the brush position also at AV=0, AV=4 and AV=8 also. The limit is ±0.2 AV. (each pattern element is 0.1AV). Note: Some R AV boards have circular marks indicating full step intervals and others have triangular marks.

  • Page 61: Eye Level Finder

    Canon NEW F-1 Service manual Eye level finder Numbers 1-26 Page 61...
  • Page 62 Canon NEW F-1 Service manual Assembly and Adjustment Notes 1. The thinner side of the eyepiece mask (6) goes to the right. 2. Eyepiece Frame (7) The plastic foam light shield in eyepiece frame (7) should not be visible. The notch in the frame goes down.
  • Page 63 Canon NEW F-1 Service manual Assembly and Adjustment Notes 7. Assemble the contacts (16) and (18) so contact I (18) is under contact II (18). 8. After installing the accessory shoe mounting plate (23), apply black diabond all around the joint with the prism cover so no crack is left open. (Water resistance) 9.
  • Page 64 Canon NEW F-1 Service manual Numbers 1-39 Page 64...
  • Page 65 Canon NEW F-1 Service manual Assembly and Adjustment Notes 1. The eyepiece shutter is assembled as shown. 2. Pentaprism Play Removal Select the correct spacer (a) for the left side. Select the correct spacer (b) for the right side. (Both spacers are available in several sizes.) Bond the spacers in place with black diabond.

  • Page 66: Moisture Resistant Treatment

    Canon NEW F-1 Service manual Moisture Resistant Treatment Apply moisture-proofing (Tuffy TF-1156) at the points indicated by hatching. 1. On the body at the SW 18 mounting 6. Pentaprism Contacts (X contact) position. 2. On the body at the SW 12 mounting position.
  • Page 67 Canon NEW F-1 Service manual 9. MD Contact (Front side) 13. Pentaprism Contacts (X contacts) 10. MG 3 Lead connections 14. Capasitor CE1 (SV Board) 11. Main flex front side soldering (1) Soldering points on front of board. (2) Rear Side: Capacitor leg and hole - Liberal amount 12.

  • Page 68: Water Resistant Treatment

    Canon NEW F-1 Service manual Water resistant treatment 1. Inject silicone in the space between 4. Use the teflon washer in the release the front panel and the lower body lock lever. "obi" (band). 5. Place the teflon washer in the shutter 2.
  • Page 69 Canon NEW F-1 Service manual 7. Place the rubber seal between the 11. Lift the exposure flex out of the way front panel and body die castings. and put silicone (KE 347B) in the space shown below. 8. Bond the following needle adjustment hole cover in place (1).

  • Page 70: Shutter Speed Variations

    Canon NEW F-1 Service manual Shutter speed variations (Based on +/- EV) T=2 2000 1000 1” 2” 4” 8” EV \ 0 500 0.691 1.381 2.762 5.524 11.05 22.10 44.19 88.39 176.8 353.6 707.1 1414.2 2828 5657 11314 0.450 0.667 1.334...

  • Page 71: Service Tools List

    Canon NEW F-1 Service manual Service tools list (Ref. No. C1-0751) TEST EQUIPMENT (USE) (NAME OF TEST EQUIPMENT) 1. Shutter Shutter Tester (Model 7J-18C) or PA-16 Transistorized Shutter Tester or Simplified Shutter Tester 2. Exposure Meter D.C Voltage Tester (Digital Tester Model VOAC 7 07 or...
  • Page 72 Canon NEW F-1 Service manual SMALL HAND TOOLS Canon NEW F-1 (C12-0751) Place of use CY9-6129-000 Rewind Shaft CY9-6130-000 AVO Wiper CY9-6131-000 Winding Lever Screw, Shutter Button Ring CY9-6132-000 ASA Dial Nut CY9-6133-000 2nd Curtain Latch CY9-6134-000 Rewind Knob Pin-face Screw...
  • Page 73 Canon NEW F-1 Service manual CY9-6127-000 Indicator Cable CY9-6128-000 VR TV Circuit Board CY9-6136-000 Shutter Adj. CY9-6137-000 P.C. Terminal CY9-6138-000 Mirror Angle (45°) Adj CY9-6139-000 SW 5 Nut CY9-6140-000 Frame Counter Ratchet CY9-6141-000 Following Needle Adj CY9-6142-000 Winding Tool Page 73...

  • Page 74: Troubleshooting Charts

    Canon NEW F-1 Service manual Troubleshooting charts Series 1: Shutter Will Not Release Meter Always ON Miscellaneous No V Batt No E 1 No Vc No KVc Sw 2 Check Sw 4 Check Sw 5 Check Sw 11 Check 1.10 Mg 3 Check 1.11...
  • Page 75 Canon NEW F-1 Service manual Meter always on *: Check for after effects (stains, etc.) of moisture condensation. Page 75...
  • Page 76 Canon NEW F-1 Service manual 1.2 Miscellaneous Page 76...
  • Page 77 Canon NEW F-1 Service manual Miscellaneous (contd.) Page 77...
  • Page 78 Canon NEW F-1 Service manual No V Batt Page 78...
  • Page 79 Canon NEW F-1 Service manual No E 1 Page 79...
  • Page 80 Canon NEW F-1 Service manual No Vc (Correct Vc : 1.3V +/- 50mV) 1.6 No KVC Page missing Page 80...
  • Page 81 Canon NEW F-1 Service manual 1.7 SW 2 Check Page 81...
  • Page 82 Canon NEW F-1 Service manual 1.8 SW 4 Check Page 82...
  • Page 83 Canon NEW F-1 Service manual 1.9 SW 5 Check 1.10 SW 11 Check Page missing Page 83...
  • Page 84 Canon NEW F-1 Service manual 1.11 Mg 3 Check Page 84...
  • Page 85 Canon NEW F-1 Service manual 1.11 Mg 3 Check (contd.) Page 85...
  • Page 86 Canon NEW F-1 Service manual 1.12 Mg 2 Check Page 86...
  • Page 87 Canon NEW F-1 Service manual 1.12 Mg 2 Check (contd.) Page 87...
  • Page 88 Canon NEW F-1 Service manual 1.13 No Clock Pulse Page 88...

  • Page 89: Parts Lists

    Canon NEW F-1 Service manual Parts Lists CANOW NEW F-1 SERVICE PARTS POLICY 1. THE POLICY OF CAMERA SERVICE, TOKYO, IS TO STOCK ALL PARTS NECESSARY TO EFFECT EFFICIENT ECONOMICAL SERVICE. IT IS NEITHER NECESSARY NOR TECHNICALLY FEASIBLE TO STOCK SEPARATELY EVERY PART THAT GOES INTO EACH PRODUCT.
  • Page 90 Canon NEW F-1 Service manual REF.NO.C12-0751 CONTENTS PAGE EXTERNAL PARTS REWIND CRANK & BACK COVER BACK COVER METER/INDICATOR & REWIND SHUTTER SPEED SELECTOR FRONT PANEL UNIT & MAIN P.C.B MIRROR ASSY & LIGHT SHIELDS AE RESISTOR MAX. APERTURE CORRECTION UNITS ...
  • Page 92 Pg.1 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-2081-000 CA1-2085-000 RING, O CA1-2086-000 COLLAR CA1-2116-000 WINDOW, FILM COUNTER CA1-2117-000 BUTTON, REWIND CA1-2118-000 SPACER CA1-2119-000 LEVER, WINDING CA1-2120-000(100) GUIDE, WINDING LEVER CA1-2121-000 SPACER CA1-2122-000 SCREW, FLAT FACE...
  • Page 94 Pg.2 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-1908-000 COVER, BASE CA1-2090-000 WINDOW CA1-2096-000 LEVER, LOCK CA1-2097-000 LATCH, SAFETY CA1-2098-000 CONE CA1-2102-000(XXX) WASHER CA1-2103-000 CA1-2108-000 WASHER CA1-2112-000 KNOB, REWIND CRANK CA1-2113-000 SCREW CA1-2148-000 SPACER...
  • Page 96 Pg.3 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 13-9614-000 STOPPER 13-9999-000 PLATE, NAME 19-1156-000 PLATE, PRESSURE 97-5644-000 SPRING, COIL CA1-2068-000 RAIL(RIGHT) CA1-2069-000 RAIL(LEFT) CA1-2140-000 HOLDER, CARTRIDGE CA1-2143-000 PRESSURE, FILM CA1-2454-000(XXX) WASHER CA1-5152-000 SHAFT, HINGE CG1-0138-000...
  • Page 98 Pg.4 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-2073-000 HOLDER, REWIND SHAFT CA1-2074-000 FORK, REWIND CA1-2075-000 OPENER, BACK COVER CA1-2076-000 CONTACT CA1-2077-000 SEAL, CONNECTOR CA1-2084-000 HOOK CA1-2246-000 CLAW, FINDER INFORM.BRIND CA1-2249-000 BASE, SHUTTER SPEED INDICATION CA1-2250-000 INDICATOR, SHUTTER SPEED...
  • Page 100 Pg.5 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-1944-000 SCREW, SLOTTED, SHOULDER CA1-2041-000 ROD, RELEASE CA1-2051-000 FRAME, INFORMATION INDICATOR CA1-2052-000 SHEET, DIAPHRAGM INDEX CA1-2053-000 NEEDLE, FOLLOWING CA1-2057-000 GUIDE, AVO INDICATOR CA1-2079-000 TERMINAL, SW4 CA1-2081-000 CA1-2228-000...
  • Page 102 Pg.6 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 13-9744-000 CUSHION CA1-2027-000 PLATE, ACCESSORY CA1-2046-000 LEVER, M.E. SET CA1-2058-000 PLATE, POSITION SET CA1-2061-000 CUSHION CA1-2062-000 HOLDER, REWIND SHAFT CA1-2063-000 TERMINAL, M.D. CA1-2064-000 COLLAR CA1-2065-000 HOLDER...
  • Page 104 Pg.7 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 97-7607-000 HOLDER, MIRROR CA1-2269-000 SHAFT, MIRROR CA1-2270-000(XXX) COLLAR CA1-2271-000 HOLDER, MIRROR HINGE CA1-2274-000(XXX) WASHER, ADJUSTING CA1-2275-000 MASK CA1-2276-000 PLATE, PROTECTION CA1-2277-000 HOLDER, FOCUSING SCREEN UNIT CA1-2278-000 PLATE, ACCESSORY CA1-2313-000...
  • Page 106 Pg.8 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-2029-000 STUD CA1-2273-000(XXX) CUSHION CA1-2289-000 PIN, MAX.APERTURE CORRECTION CA1-2292-000 INSULATOR CA1-2315-000 WASHER CA1-2318-000 SHAFT, CORRECTION LEVER CA1-2325-000 LEVER, COUPLING ADJ. CA1-2334-000 WASHER, SPRING CA1-2335-000 INSULATOR CA1-2387-000...
  • Page 108 Pg.9 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-2261-000(XXX) STOPPER CA1-2262-000 COLLAR CA1-2272-000 LEVER, MIRROR RETURN CA1-2279-000 CONTACT, FINDER(RIGHT) CA1-2280-000 CONTACT, FINDER(LEFT) CA1-2281-000 HOLDER, SPRING CA1-2284-000 BUTTON, STOP DOWN MEASURING CA1-2285-000 SLIDE, DIAPHRAGM CLOSING CA1-2287-000 COLLAR...
  • Page 110 Pg.10 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-2011-000 GEAR, COUNTER CA1-2012-000(XXX) RING, C CA1-2017-000 RING, C CA1-2020-000 SHAFT, SPROCKET CA1-2021-000 STUD CA1-2022-030(XXX) SCREW, SPROCKET CA1-2024-000 CASE, CLICK CA1-2033-000 CAM, RELEASE CA1-2036-000 BASE, CONTACT CA1-2037-000...
  • Page 112 Pg.11 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION CA1-1918-000(220) NUT, ADJUSTING CA1-1918-000(225) NUT, ADJUSTING CA1-2026-000 LEVER, DIAPHRAGM RELEASE CA1-2028-000(XXX) SCREW CA1-2201-000 CONTACT, BATTERY(-) CA1-2202-000 SCREW CA1-2203-000 CONTACT, EARTH CA1-2210-000 COLLAR, STOPPER CF1-0749-000 ARMATURE CF1-0750-000...
  • Page 114 Pg.12 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 13-9523-000 13-9561-000 CA1-1918-000 CA1-1931-000 NUT, BRAKE CA1-1943-000 COLLAR CA1-1944-000 SCREW CA1-1972-000 COLLAR CA1-1979-000 WASHER CA1-1980-000 LEATHER, 2ND CURTAIN BRAKE CA1-1981-000 DISK, 2ND CURTAIN BRAKE CA1-1985-000 LEVER, SIGNAL CA1-1989-000...
  • Page 116 Pg.13 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 13-9889-000 ROLLER 13-9991-000 CAM, CLUTCH 14-4498-000 BALL, STEEL CA1-1949-000 SPOOL CA1-1950-000 RATCHET, MULTI-EXPOSURE CA1-1959-000 BASE, CONTACT CA1-1960-000 CONTACT CA1-1961-000 INSULATOR CA1-1963-000 PLATE, CLUTCH HOLD CA1-1964-000 SPACER, WINDING CAM CA1-1965-000...
  • Page 118 Pg.14 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 97-5733-000(XXX) SPRING, COIL CA1-1991-000 CUSHION CA1-1992-000 HOLDER, CUSHION CA1-1999-000 LEVER, MAGNET CHARGE CA1-2000-000 SCREW CA1-2185-000 ARMATURE CA1-2186-000 E RING CA1-2484-000 COVER, DUST CF1-0692-000 LEVER, MIRROR RELEASE CF1-0693-000 LEVER, DIAPHRAGM RELEASE...
  • Page 120 Pg.15 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 13-9872-000 RING, NECK STRAP 14-4498-000 BALL, STEEL CA1-1919-000 SHAFT, IDLER CA1-1920-000 SHAFT, BRAKE CA1-1924-000 SCREW CA1-1928-000 WASHER CA1-1929-000 LEATHER, 1ST CURTAIN BRAKE CA1-1930-000 DISK, 1ST CURTAIN BRAKE CA1-1931-000 NUT, BRAKE...
  • Page 122 Pg.16 P A R T S L I S T REF.NO.C12-0751 NEW PARTS NO. CLASS QTY DESCRIPTION 13-8505-000 SHIELD, LIGHT 13-9880-000 PIN, STOPPER 14-4498-000 BALL, STEEL CA1-1912-000 CUSHION CA1-1913-000 HOLDER, SHAFT CA1-1914-000 SHIELD, LIGHT CA1-1915-000 STUD CA1-1916-000 SHAFT, RELEASE SPRING CA1-1917-000 SHAFT, GEAR CA1-1921-000...
  • Page 123 Pg.17 E L E C T R I C P A R T S L I S T REF.NO.C12-0751 NEW SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARK CY4-0055-000 RESISTOR, HIGH VOLTAGE 50 OHM 1/8W ACF-545 CH4-0055-000 T2682A VR9-1103-000 RESISTOR 33KOHM 1/8W VR9-1109-000 RESISTOR 56KOHM 1/8W...
  • Page 124 Pg.18 E L E C T R I C P A R T S L I S T REF.NO.C12-0751 NEW SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARK RMTV VR5-0131-960 RESISTOR 196 OHM 1/8W ACF-642 RMTV VR5-0132-260 RESISTOR 226 OHM 1/8W ACF-642 RMTV VR5-0132-490...
  • Page 125 Pg.19 E L E C T R I C P A R T S L I S T REF.NO.C12-0751 NEW SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARK VR9-1597-000 RESISTOR 51 KHOM 1/8W VR9-1753-000 RESISTOR 47 KHOM 1/8W VR9-1885-000 RESISTOR 16 KHOM 1/8W VR9-1887-000 RESISTOR 24 KHOM 1/8W...

This manual is also suitable for:

F1 service

Table of Contents