Canon F1 Service Manual page 166

10) Install the Reader Fixing Plate L.
• 1 Screw (RS Tightening; M4 x 8)
• 2 Bosses
Boss
Boss
6
Installation > Installation Procedure > Connecting this Machine
F-6-24
6 Installation > Installation Procedure > Connecting this Machine
11) Attach the Reader Fixing Plate R.
Open the Wire Saddle, and attach the Reader Fixing Plate R by putting the plate through
the Control Panel Cable and the Power Supply Cable. (Only for the Flat Control Panel
models)
• 1 Screw (RS Tightening; M4 x 8)
• 2 Bosses
NOTE:
By allowing extra cable, it makes easier to attach the Reader Fixing Plate R.
12) Close the Wire Saddle opened in step 11.
6-10
Reader Fixing
Plate R
boss
boss
F-6-25
6-10