Canon F1 Service Manual page 167

13) Lift the Original Pickup Tray and remove the Tag Attached Cord and the Roller
Pressure Release Member.
14) Open the DADF, and install the Left Upper Small Cover.
• 1 Protrusion
• 1 Claw
NOTE:
Be sure to push it in until it clicks.
Protrusion
6
Installation > Installation Procedure > Connecting this Machine
F-6-26
Claw
F-6-27
6 Installation > Installation Procedure > Connecting this Machine
CAUTION: Points to note when moving the host machine
When moving the host machine, be sure to remove the Left Upper Small Cover and
install the Scanner Fixation Tool.
15) Close the DADF.
6-11
F-6-28
6-11