Canon F1 Service Manual page 87

4
Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
13) Install the Reader Support Plate [A].
• 2 Screws [1]
x2
[1]
4 Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
[A]
F-4-23
14) Lift up the DADF + Reader Unit slightly with a screwdriver by applying the principle of
leverage, and remove the 4 Rubber Plates [1] from the host machine (printer).
CAUTION:
• When attempting to lift up the DADF + Reader Unit fully without first removing the 4
Rubber Plates, force is generated when the Rubber Plates are removed, which may
cause the DADF + Reader Unit to fall.
• To make the work easier, remove the Rubber Plates in the front side first.
• Do not use a long screwdriver. Otherwise, it may be bent.
[1]
CAUTION:
• Because the weight of the equipment is approx. 40 kg, be sure to work with 2 or
more people when lifting it up/down. Also, be sure to lift the equipment horizontally.
• When lifting up/down the DADF + Reader Unit, be careful not to get the cables and
fingers caught.
4-11
[1]
F-4-24
4-11